







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Costa Mesa?
Walk-in shower installation in Costa Mesa runs $4,500 to $12,000 for a full bathroom-ready build in 2026, with most jobs landing between $6,000 and $8,500. The price swings on two things: the size of the shower footprint and whether we’re cutting into the slab or working with the existing drain location. A curbless shower with a linear drain and frameless glass sits at the top of that range; a standard curb shower with a prefab pan and semicolon-clean tile sits near the bottom.
We put the number in writing before a single tile is set. That’s The Garrison Standard: a written price, a documented scope, and a crew you’ve met before anyone walks through your door.
Key Takeaways
- Typical range: $4,500 to $12,000 for a complete walk-in shower in Costa Mesa.
- Most common project: $6,000 to $8,500 for a 36″ x 60″ curbed shower with tile and glass.
- Biggest price driver: curbless (slab cut) versus curbed (no slab cut), which can be a $2,000 to $3,500 swing on its own.
- Materials matter: a porcelain tile shower and a natural stone shower can differ by $3,000 or more in material alone.
- Written price before work starts, always. No numbers that move at the door.
- 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the $4,500 to $12,000 range breaks down line by line. These are Costa Mesa numbers, not national averages – Orange County labor runs higher than most of the country, and the cost inside that range moves on the specific line items below.
| Line Item | Costa Mesa Price Range |
|---|---|
| Demolition and haul-away of existing tub/shower | $400 – $900 |
| Rough-in plumbing (drain relocation, valve, supply lines) | $600 – $1,800 |
| Waterproofing and substrate (cement board, Schluter or equivalent) | $500 – $1,300 |
| Shower pan and slope (prefab or poured) | $350 – $1,200 |
| Tile setting (walls and floor, standard porcelain) | $1,200 – $2,800 |
| Tile material (porcelain versus natural stone) | $400 – $2,500 |
| Frameless glass enclosure | $800 – $2,200 |
| Shower valve and trim (Kohler, Moen), rain head, handheld | $400 – $1,400 |
| Bench, niche, or grab bar additions | $300 – $1,200 |
| Permit and inspection (City of Costa Mesa) | $250 – $600 |
| Complete walk-in shower, installed | $4,500 – $12,000 |
What pushes a job to the top of that range? A curbless design that requires cutting the slab and re-flooding the drain line, natural stone tile with a grout joint that has to be dead-square, and a frameless glass enclosure with a custom angle for a non-standard alcove. What keeps a job at the bottom? A standard 36″ x 60″ alcove, a prefab shower pan, porcelain tile in a straightforward grid pattern, and a semicolon-frameless glass door. The scope is what moves the number, and we write the scope down before any demo begins.
What Affects Walk-In Shower Installation Pricing in Costa Mesa
- Slab condition and drain location. Costa Mesa has a mix of single-story ranch homes built from the 1950s through the 1970s and newer infill construction. Older homes often have a cast-iron drain with limited slope, and moving the drain even a foot off center can add $600 to $1,200 to the rough-in. A curbless shower on a post-tension slab is the most expensive scenario, because the slab has to be cut carefully and the drain has to be repositioned without compromising the tensioning cable.
- Tile choice and layout. A 12″ x 24″ porcelain tile in a stacked pattern is the least expensive wall treatment. A herringbone or a large-format marble look costs more in both material and labor – every cut is different, and the setting rate reflects that. Expect herbone and large-format to add $800 to $2,000 to the tile line.
- Glass and hardware. A framed sliding door is your lowest-cost glass option. A frameless fixed panel with a single door is standard for a walk-in. A fully frameless corner installation with a custom shower door angle, heavier 3/8″ glass, and premium hinges sits at the top. That’s a $1,000 to $2,200 swing.
- Permitting in Costa Mesa. A shower replacement that involves moving the drain, relocating the valve, or altering the waterproofing system requires a permit and inspection from the City of Costa Mesa Building Division. Simple tile-over on an existing waterproofed pan usually does not. We pull the permit, schedule the inspection, and keep the paperwork in the project file – that’s part of The Garrison Code.
- Access and logistics. A second-floor bathroom or a tight Eastside Costa Mesa stairwell adds labor for getting materials up and debris down. If the shower has to be demoed and carted through a hallway with a sharp turn, that adds time. We walk the access path before quoting, not after.
- Fixture brand and finish. A Kohler or Moen valve and trim package is a documented, warrantied installation. A builder-grade valve with no manufacturer spec sheet is not. When the finish is brushed nickel, matte black, or another premium finish, expect the trim cost to climb $150 to $400 per set.
If you’re weighing a shower against a full bathroom remodel, our home page and our Costa Mesa service area page are the best places to see how the numbers compare across project types.

How to Save on Walk-In Shower Installation
The trick to saving on a walk-in shower in Costa Mesa isn’t finding the cheapest tile – it’s buying the right scope. Here’s how we’ve helped homeowners keep costs in the lower half of the $4,500 to $12,000 range without sacrificing the waterproofing or the glass.
- Keep the drain where it is. If the existing drain is centered and the slope is correct, a curbed shower can be built without a slab cut. That alone saves $600 to $1,200 in rough-in and $300 to $500 in slab work.
- Choose porcelain over stone. A well-chosen porcelain tile (available in marble-look, concrete-look, and wood-look) performs as well as natural stone in a wet environment and costs $1,000 to $2,000 less on a typical shower wall.
- Use a semicolon-frameless door, not a fully frameless corner unit. You get the open feel of frameless glass with a framed panel on the fixed side. That saves roughly $500 to $800.
- Combine with other bathroom work. If you’re already planning a bathroom remodel in Costa Mesa (range $9,000 to $28,000), folding the shower into the same permit and the same demo day reduces the total. Same for a small bathroom remodel ($5,000 to $12,000).
- Skip the bench and niche, add them later if you want. A built-in bench, a niche, and a grab bar add $300 to $1,200 combined. If budget is tight, a freestanding teak bench and a surface-mounted caddy do the same job for under $200.
Every estimate we write is free and upfront. Call (855) 659-2556 and a live person will pick up, day or night, to schedule a walkthrough.
Walk-In Shower vs. Tub-to-Shower Conversion vs. Shower Replacement in Costa Mesa
Three different jobs get quoted three different ways, and homeowners often call one by the wrong name. Here’s the distinction, with the Costa Mesa price range for each:
- Walk-in shower installation ($4,500 to $12,000): A new shower built into a space where there wasn’t one, or a full gut of an existing shower down to the studs with new waterproofing, new tile, new glass, and a new valve. This is the job on this page.
- Tub-to-shower conversion ($3,500 to $10,000): Removing a tub and building a shower in the same footprint. Usually less expensive than a walk-in because the drain line and supply lines are already in the right place for a standard pan.
- Shower replacement ($3,000 to $8,500): Swapping out a failed shower – new tile over a new waterproofing system, often keeping the existing valve and drain. The lowest of the three when the existing rough-in is sound.
The difference between these three numbers is mostly about how much plumbing gets moved and whether the waterproofing system is being replaced or just refreshed. We measure the existing rough-in before we quote, so the number you get on paper is the number you pay.
What Does the 365-Day Done Right Promise Cover on a Walk-In Shower?
The 365-Day Done Right Promise means that if the shower we installed fails within a full year of completion – a leaking pan, a failed waterproofing membrane, a door that won’t close square, a tile that debonds – we come back and correct it at no charge. That’s a full year from the day we hand you the signed written guarantee, not from the day we start. It covers our install and the workmanship behind it. It does not cover manufacturer defects in the tile, glass, or valve (those carry their own manufacturer warranties, and we help you file).
The promise is in writing, signed, and in your hand at job close – along with the documented scope, the final invoice, and the permit inspection record. That’s what “squared away” looks like when we walk off the job: a clean site, a signed guarantee, and a bathroom you can actually use.

Why Bradford Remodeling Co Costa Mesa for Walk-In Shower Installation
We’re part of the Garrison Partners family (established 2004), and we operate as an independently owned and operated business held to The Garrison Standard. Every job starts with a written price and ends with a signed guarantee. Between those two points, you get:
- Background-checked, uniformed technicians. You’ll know exactly who is walking through your door before the crew arrives. Identity and conduct standards are set at the Garrison Partners level.
- A live person answering the phone, 24/7. Not a voicemail, not a callback queue. Call (855) 659-2556 at 9 p.m. and a person picks up.
- A documented brand roster. We install Kohler and Moen valves and trim, and we spec tile, glass, and waterproofing to manufacturer requirements so the spec sheet is traceable. That’s how a written guarantee has teeth.
- Up to 22 years of technician experience. Our technicians bring up to 22 years of experience to every shower build.
- The Garrison Code. Our operating framework for how jobs are scoped, sequenced, and closed out. Clean site, documented scope, written guarantee. No exceptions.
Book a Free Walk-In Shower Estimate in Costa Mesa
If you’re in Costa Mesa and the shower is on your list for 2026, the next step is a walkthrough. We’ll measure the existing rough-in, talk through tile and glass options, and hand you a written price before we leave. No pressure, no countdown, no “today only” pricing.
Call (855) 659-2556 for a free estimate. A live person answers 24 hours a day, 7 days a week.
If you’re also planning a kitchen remodel in Costa Mesa, a tub-to-shower conversion in Costa Mesa, a shower replacement in Costa Mesa, a bathroom vanity installation in Costa Mesa, a countertop installation in Costa Mesa, or whole-home remodeling in Costa Mesa, the same written-price and 365-Day Done Right Promise applies. For nearby projects and service details, see our Costa Mesa service area page.
FAQs – Walk-In Shower Installation Cost in Costa Mesa
How much does a walk-in shower cost in Costa Mesa?
A walk-in shower in Costa Mesa costs $4,500 to $12,000 in 2026, with most jobs landing between $6,000 and $8,500. That range covers a full gut down to the studs, new waterproofing, new tile, new glass, and a new valve. Call (855) 659-2556 for an exact quote on your bathroom – estimates are free.
Is a walk-in shower cheaper than a tub-to-shower conversion in Costa Mesa?
No. A tub-to-shower conversion in Costa Mesa runs $3,500 to $10,000, which is usually $1,000 to $2,000 less than a walk-in shower because the drain and supply lines are already in the right place. A walk-in shower ($4,500 to $12,000) often requires moving the drain, cutting the slab, or building a curbless pan. Call (855) 659-2556 and we’ll tell you which one your bathroom actually needs.
How long does walk-in shower installation take in Costa Mesa?
A standard walk-in shower takes 5 to 10 working days for a full gut and install. Curbless showers on a post-tension slab run closer to 10 to 14 days because the slab work and drain relocation add time. The permit and inspection from the City of Costa Mesa adds 2 to 5 days to the schedule. Call (855) 659-2556 to schedule a walkthrough and get a realistic start date.
Is it cheaper to repair or replace a shower in Costa Mesa?
A shower repair in Costa Mesa runs $300 to $1,800 for a caulk and grout refresh, a valve replacement, or a glass panel swap. A shower replacement runs $3,000 to $8,500. The decision hinges on the pan and the waterproofing: if the pan is solid and the membrane is intact, repair makes sense. If the pan is cracked, the tile is hollow, or there’s water staining on the framing, replacement is the safer money. Call (855) 659-2556 and we’ll evaluate it honestly – we don’t sell a replacement when a repair will hold.
Do I need a permit for a walk-in shower in Costa Mesa?
Yes, in most cases. A walk-in shower that moves the drain, relocates the valve, or replaces the waterproofing system requires a permit and inspection from the City of Costa Mesa. A tile-over on an existing waterproofed pan usually does not. We pull the permit, schedule the inspection, and keep the paperwork in the project file. Call (855) 659-2556 and we’ll confirm the permit scope before any work starts.
Pricing reflects the Costa Mesa market as of 2026. Bradford Remodeling Co Costa Mesa offers free estimates – call (855) 659-2556.
What Our Customers Say
"Solid job. Small punch list items were done within a few days of the walkthrough."
- Beth K."Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L."Respectful crew. Covered the floors and swept every day."
- Jackie T.












